Curioustab

Home » Digital Electronics » Combinational Logic Circuits

For a two-input XNOR gate, with the input waveforms as shown below, which output waveform is correct?

a
b
c
d

Correct Answer: d

← Previous Question Next Question→

More Questions from Combinational Logic Circuits

Which of the K-maps given below represents the expression X = AC + BC + B?
Which of the following logic expressions represents the logic diagram shown?
Based on the indications of probe A in the figure given below, what is wrong, if anything, with the circuit?
The device shown here is most likely a ________.
How many 3-line-to-8-line decoders are required for a 1-of-32 decoder?
Which of the following expressions is in the product-of-sums form?
A 74HC147 priority encoder has ten active-LOW inputs and four active-LOW outputs. What would be the state of the four outputs if inputs 4 and 5 are LOW and all other inputs are HIGH?
A decoder can be used as a demultiplexer by ________.
Which of the following combinations of logic gates can decode binary 1101?
An output gate is connected to four input gates; the circuit does not function. Preliminary tests with the DMM indicate that the power is applied; scope tests show that the primary input gate has a pulsing signal, while the interconnecting node has no signal. The four load gates are all on different ICs. Which instrument will best help isolate the problem?

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion