Curioustab

Home » Digital Electronics » Interfacing to the Analog World

A data acquisition system may communicate via two common buses: the data bus and the control bus.

True
False

Correct Answer: True

← Previous Question Next Question→

More Questions from Interfacing to the Analog World

The output of an analog-to-digital converter is a voltage level.
When the analog input to a tracking A/D converter is at a constant level, the digital output will oscillate.
A DAC is monotonic if its output increases as its binary input is incremented from one value to the next.
To be useful, A/D or D/A converters must have meaningful representation of the analog quantity and a digital representation and the digital quantity as an analog representation.
When a DAC output shows a deviation of the measured step size from the ideal step size, this error is called nonlinearity.
An eight-bit D/A converter has a resolution of 0.125.
If the least significant bit (LSB) of a four-bit binary-weighted resistor D/A converter connects to a 200 Ω resistor, then the resistor needed for the next bit is 100 Ω.
It is possible to develop more than 16 different analog levels using 4-bit resolution.
Generally speaking, DACs with a current output will have a shorter settling time than those with voltage outputs.
D/A conversion is the process of taking a voltage or current and converting it to a digital code.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion