Curioustab

Home » Civil Engineering » UPSC Civil Service Exam Questions

The absolute maximum Bending Moment in a simply supported beam of span 20 m due to moving udl of 4 t/m spanning over 5 m is

87.5 t-m at the support
87.5 t-m near the midpoint
3.5 t-m at the midpoint
87.5 t-m at the midpoint

Correct Answer: 87.5 t-m at the midpoint

← Previous Question Next Question→

More Questions from UPSC Civil Service Exam Questions

The following steps are involved in laying a sewer in a trench : 1. Transferring the center line of the sewer to the bottom trench. 2. Setting sight rails over the trench. 3. Driving pegs to the level of the invert line of the sewer. 4. Placing the sewer of these steps is The correct sequence of these steps is
The shear force diagram of a beam is shown in the given figure. The absolute maximum bending moment in the beam is
A pin-jointed tower truss is loaded as shown in the given figure. The force induced in the member DF is
A high efficiency pump is required for low discharge, high head and low maintenance cost. Delivery of water need not be continuous. The pump need not run at high speed. Which one of the following is the correct choice?
A soil has a liquid limit of 45% and lies above the A-line when plotted on a plasticity chart. The group, symbol of the soil as per Soil Classification is
In a tilted aerial photograph, if the swing is 230°, then the rotation angle is equal to

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion