Curioustab

Home » Civil Engineering » Theory of Structures

A simply supported beam A carries a point load at its midspan. An other identical beam B carries the same load but uniformly distributed over the entire span. The ratio of the maximum deflections of the beams A and B, will be

Correct Answer:

← Previous Question Next Question→

More Questions from Theory of Structures

The load on a spring per unit deflection, is called
Ab and Ac are the cross sections of bronze and copper bars of equal length, σb, σc are their respective stresses due to load P. If Pb and Pc are the loads shared by them, (where Eb and Ec are their modulii).
In a shaft, the shear stress is not directly proportional to
The locus of the moment of inertia about inclined axes to the principal axis, is
The equivalent length of a column of length L, having one end fixed and other end hinged, is
The maximum height of a masonry dam of a triangular section whose base width is b and specific gravity s, is
The locus of the end point of the resultant of the normal and tangential components of the stress on an inclined plane, is
The forces acting normally on the cross section of a bar shown in the given figure introduce
The ratio of the length and depth of a simply supported rectangular beam which experiences maximum bending stress equal to tensile stress, due to same load at its mid span, is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion