Curioustab

Home » Civil Engineering » Theory of Structures

The maximum deflection due to a uniformly distributed load w/unit length over entire span of a cantilever of length l and of flexural rigidly EI, is

Correct Answer:

← Previous Question Next Question→

More Questions from Theory of Structures

In plastic analysis, the shape factor for a triangular section, is
A steel rod 1 metre long having square cross section is pulled under a tensile load of 8 tonnes. The extension in the rod was 1 mm only. If Esteel = 2 x 106 kg/cm2, the side of the rod, is
Pick up the correct statement from the following:
Principal planes are subjected to
Keeping the depth d constant, the width of a cantilever of length l of uniform strength loaded with a uniformly distributed load w varies from zero at the free end and
A concentrated load P is supported by the free end of a quadrantal ring AB whose end B is fixed. The ratio of the vertical to horizontal deflections of the end A, is
If Q is load factor, S is shape factor and F is factor of safety in elastic design, the following:
The total strain energy of a beam of length L, having moment of inertia of its section I, when subjected to a bending moment M, is
A spring of mean radius 40 mm contains 8 action coils of steel (N = 80000 N/mm2), 4 mm in diameter. The clearance between the coils being 1 mm when unloaded, the minimum compressive load to remove the clearance, is
The point of contraflexure is the point where

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion