Curioustab

Home » Civil Engineering » Surveying

For taking offsets with an optical square on the right hand side of the chain line, it is held

by right hand upside down
by left hand upright
by right hand upright
by left hand up side down.

Correct Answer: by left hand upright

← Previous Question Next Question→

More Questions from Surveying

While setting a plane table at a station it was found that the error in centering was 30 cm away from the ray of length 40 m drawn from the station. If the scale of the plan is 1 cm = 2 cm, the displacement of the end of the ray in plan from the true position will be
The angle of intersection of a curve is the angle between
If 50 m point of a 100 m tape is 50 cm off line, and 50 m sections are straight, an error is generated equal to
If i is the stadia distance, f is the focal length and d is the distance between the objective and vertical axis of the techeometer, the multiplying constant, is
Correction per chain length of 100 links along a slope of α° is
Location of contour gradient for a high way is best set out from
Staff readings on pegs x and y from X station are 1.755 m and 2.850 m, and from station Y on staff head at Y and X are 0.655 m and 1.560 m. If reduced level of X is 105.5 m, the reduced level of Y is
Stadia techeometry was discovered by James Watt in the year.
The correction to be applied to each 30 metre chain length along θ° slope, is
The constant vertical distance between two adjacent contours, is called

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion