Curioustab

Home » Civil Engineering » Surveying

If the declination of the needle is 10° W

each of the whole circle reckoning has to be micros by 10°
in the quadrantal method, the correction is positive in the 1st and 3rd quadrants
in the quadrantal method, the corrections is negative in 2nd and 4th quadrants
all the above.

Correct Answer: all the above.

← Previous Question Next Question→

More Questions from Surveying

The back staff reading on a B.M. of R.L. 500.000 m is 2.685 m. If foresight reading on a point is 1.345 m, the reduced level of the point, is
The conventional sign shown in below figure represents a
For taking offsets with an optical square on the right hand side of the chain line, it is held
While setting a plane table at a station it was found that the error in centering was 30 cm away from the ray of length 40 m drawn from the station. If the scale of the plan is 1 cm = 2 cm, the displacement of the end of the ray in plan from the true position will be
The angle of intersection of a curve is the angle between
If 50 m point of a 100 m tape is 50 cm off line, and 50 m sections are straight, an error is generated equal to
If i is the stadia distance, f is the focal length and d is the distance between the objective and vertical axis of the techeometer, the multiplying constant, is
Correction per chain length of 100 links along a slope of α° is
Location of contour gradient for a high way is best set out from
Staff readings on pegs x and y from X station are 1.755 m and 2.850 m, and from station Y on staff head at Y and X are 0.655 m and 1.560 m. If reduced level of X is 105.5 m, the reduced level of Y is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion