The greater clear dimension of web of thickness't' should not exceed

More Questions from Structural Design Specifications

• For under water concreting.
• Four reinforcing bars of 30 mm diameter each, are bundled in contact. The lower two bars extend up to end supports. The distance between the points of termination of the upper bars, is kept
• In the formula
• The staggered pitch is the distance between two consecutive rivets measured
• A column of rectangular section is considered short, if both the slenderness ratios are less than
• If a and b are the sides of a square column and its base, the thickness of the base may be calculated from the formula
• The thickness of flat double lacing, is taken (where l is the effective length of the bar).
• The side face reinforcement is provided if the depth of the web of a beam exceeds
• The minimum thickness of the web plate for a crane gantry plate girder with a lifting load exceeding 15 tonnes, is
• The structure which is subjected to an imposed load after 72 hours for a period of 24 hours, is deemed to be unacceptable if it fails to recover the net deflection less than

Discussion & Comments