Curioustab

Home » Civil Engineering » Strength of Materials

For the beam shown in below figure, the maximum positive bending moment is nearly equal to negative bending moment when L1 is equal to

1.0 L
0.7 L
0.5 L
0.35 L.

Correct Answer: 0.35 L.

← Previous Question Next Question→

More Questions from Strength of Materials

Shear deflection of a cantilever of length L, cross sectional area A and shear modulus G, under a concentrated load W at its free end, is
In a three hinged arch, the bending moment will be zero
The ratio of the moments of resistance of a solid circular shaft of diameter D and a hollow shaft (external diameter D and internal diameter d), is
The moment diagram for a cantilever carrying a concentrated load at its free end, will be
The stress at which extension of a material takes place more quickly as compared to the increase in load, is called
A composite member shown in below figure was formed at 25°C and was made of two materials a and b. If the coefficient of thermal expansion of a is more than that of b and the composite member is heated upto 45°C, then
A joint of a frame is subjected to three tensile force P, Q and R equally inclined to each other. If P is 10 tonnes, the other forces will be
The shiftness factor for a prismatic beam of length L and moment of inertia I, is
The maximum stress intensity due to a suddenly applied load is x-times the stress intensity produced by the load of the same magnitude applied gradually. The value of x is
The tension coefficient of any member is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion