Curioustab

Home » Civil Engineering » Steel Structure Design

The safe working pressure for a spherical vessel 1.5 m diameter and having 1.5 cm thick wall not to exceed tensile stress 50kg/cm2 , is

16 kg/cm2
18 kg/cm2
20 kg/cm2
22 kg/cm2

Correct Answer: 20 kg/cm2

← Previous Question Next Question→

More Questions from Steel Structure Design

A riveted joint many experience
In a built up beam actual bending compressive stress fbc is given by (when y1 is the distance of the edge of the beam from the neutral axis).
When a tension member consists of two channel sections, the allowance for rivet hole is made for two holes from
The distance between the outer faces of flanges of a plate girder, is known as
Tacking rivets in compression plates not exposed to the weather, have a pitch not exceeding 300 mm or
Rolled steel angle sections are classified as
An imaginary line along which rivets are placed, is known as
The connection of one beam to another beam by means of an angle at the bottom and an angle at the top, is known as
Lug angle is
When the upper column does not provide full bearing area over lower column, the column splice is provided with the following assumption

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion