Home » Civil Engineering » Soil Mechanics and Foundation Engineering

Back fill with a sloping surface exerts a total active pressure Pa on the wall of height H and acts at

H/4 above the base parallel to base
H/2 above the base parallel to base
H/3 above the base parallel to base
H/5 above the base parallel to base.

Correct Answer: H/3 above the base parallel to base

← Previous Question Next Question→

More Questions from Soil Mechanics and Foundation Engineering

Degree of saturation from compaction data: A compacted soil has moisture content w = 10% and bulk density rho = 2.0 g/cm^3. Given Gs = 2.7 and rho_w = 1.0 g/cm^3, determine the degree of saturation S.
Under-reamed piles are generally
Pick up the correct statement from the following:
Shallow foundations in geotechnical engineering — the minimum depth D of a footing carrying a heavy load is commonly estimated from bearing considerations using which formula (use q for allowable bearing pressure, gamma for unit weight of soil, and phi for angle of shearing resistance)?
Soil mechanics terminology — the ratio of the weight of a given volume of soil solids to the weight of an equal volume of distilled water at the same temperature is known as:
Particle-size distribution indices — the coefficient of curvature (Cc, also called coefficient of gradation) for a soil gradation curve is defined as:
Seepage force in soils — identify the complete and correct description of seepage force with respect to flow-net geometry and hydraulic parameters.
Refraction of flow lines at soil interfaces — a flow line meets the interface between soils of permeability k1 and k2 making angles theta1 and theta2 with the normal before and after crossing. According to the law of deflection at a boundary between dissimilar isotropic soils, which relation holds?
Moisture content determination — which method gives the most accurate routine measurement of soil water content in laboratory practice?
Soil phase relationships — the ratio of the volume of voids to the volume of soil solids in a given soil mass is called:

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion