Curioustab

Home » Civil Engineering » RCC Structures Design

Though the effective depth of a T-beam is the distance between the top compression edge to the centre of the tensile reinforcement, for heavy loads, it is taken as

Correct Answer:

← Previous Question Next Question→

More Questions from RCC Structures Design

A singly reinforced beam has breadth b, effective depth d, depth of neutral axis n and critical neutral axis n1. If fc and ft are permissible compressive and tensile stresses, the moment to resistance of the beam, is
According to the steel beam theory of doubly reinforced beams
The spacing of transverse reinforcement of column is decided by the following consideration.
An under-reinforced section means
The system in which high tensile alloy steel bars (silica manganese steel) are used as prestressing tendons, is known as
If C is creep coefficient, f is original prestress in concrete, m is modular ratio, E is Young's modulus of steel and e is shrinkage strain, the combined effect of creep and shrinkage is:
The maximum shear stress (q) in concrete of a reinforced cement concrete beam is
The stem of a cantilever retaining wall which retains earth level with top is 6 m. If the angle of repose and weight of the soil per cubic metre are 30° and 2000 kg respectively, the effective width of the stem at the bottom, is
In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net settlement (i.e. total settlement minus rebound) per tonne of test load should not exceed
If the loading on a prestressed rectangular beam, is uniformly distributed, the tendon to be provided should be .

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion