Curioustab

Home » Civil Engineering » GATE Exam Questions

Group symbols assigned to silty sand and clayey sand are respectively

SS and CS
SM and CS
SM and SC
MS and CS

Correct Answer: SM and SC

← Previous Question Next Question→

More Questions from GATE Exam Questions

A hyetograph is a graph representing
Cavitation is caused by
Two completely penetrating wells are located L (in metres) apart, in homogeneous confined aquifer. The drawdown measured at the mid point between the two wells (at a distance of 0.5 L from both the wells) is 2.0 m when only the first well is being pumped at the steady rate of Q1 m3/sec. When both the wells are being pumped at identical steady rate of Q2 m3/sec, the drawdown measured at the same location is 8, 0 m. It may be assumed that the drawdown at the wells always remains at 10.0 m when being pumped and the radius of influence is larger than 0.5 L Q1/Q2 is equal to
A test plate 30 cm x 30 cm resting on a sand deposit settles by 10 mm under a certain loading intensity. A footing 150 cm x 200 cm resting on the same sand deposit and loaded to the same load intensity settles by
The stress-strain behaviour of soils as shown in the following figure corresponds to :
For a 'best' symmetrical trapezoidal section of an open channel with a given area of section and side slopes, one of the following statements holds true :
The influence line diagram for the force in member 'a' of the truss shown below is given by
Flow at critical depth takes place in an open channel When
Temporary hardness in water is caused by the presence of
The soils most susceptible to liquefaction are :

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion