Curioustab

Home » Civil Engineering » GATE Exam Questions

A frame ABCD is supported by a roller at A and is on a hinge at C as shown below The reaction at the roller end A is given by

P
2P
P/2
Zero.

Correct Answer: Zero.

← Previous Question Next Question→

More Questions from GATE Exam Questions

A cantilever beam is shown in the below figure. The moment to be applied at free end for zero vertical deflection at that point is
Standard 5-day BOD of a waste water sample is nearly x% of the ultimate BOD, where x is
A vertical rod PQ of length L is fixed at its top end P and has a flange fixed to the bottom end Q. A weight W is dropped vertically from a height h(< L) on to the flange. The axial stress in the rod can be reduced by
Which one of the following conditions, both elastic and plastic methods of analysis of indeterminate structures have to satisfy?
At highway stretches where the required overtaking sight distance cannot be provided, it is necessary to incorporate in such sections the following :
The plastic modulus of a section is 4.8 x 10-4 m3. The shape factor is 1.2. The plastic moment capacity of the section is 120 kN.m. The yield stress of the material is
An isochrone is a line on the basin map
Design rate of super elevation for horizontal highway curve of radius 450 m for a mixed traffic condition, having a speed of 125 km/hour is
The superelevation needed for a vehicle travelling at a speed of 60 kmph on a curve of radius 128 m on a surface with a coefficient of friction of 0.15 is :
Flocculation is a process

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion