Curioustab

Home » Chemical Engineering » Process Equipment and Plant Design

What is the slope of the operating line in the stripping section of a distillation column?

0
∞
> 1
< 1

Correct Answer: > 1

← Previous Question Next Question→

More Questions from Process Equipment and Plant Design

The ratio of down take area to cross-sectional area of the tube, for calendria type evaporator ranges from
A forced circulation long tube vertical evaporator as compared to the natural circulation evaporator
In a double pipe concentric heat exchanger, the equivalent diameter of annulus for heat transfer would be (where, D1 and D2 are I.D. of inner and outer pipes)
Excessive liquid gradient on a tray may result in the
In a cylinderical vessel subjected to internal pressure, the longitudinal stress σL and the circumferential stress, σn are related by
Rotary driers are most economically designed for the number of heat transfer units (HTU) from
Heat transfer co-efficient, hG(Kcal/hr.m2 .°C) and mass velocity of air, G (kg/hr.m2 ) for air flow parallel to the surface in case of constant drying rate in batch drying is related as hG = 0.0176G0.8. But when the flow of air perpendicular to the surface is encountered, this equation changes to
__________ liquor is best handled in a long tube vertical evaporator.
The testing pressure of storage tanks and pressure vessels designed as per Indian standard codes should be about __________ times.the design pressure.
Minimum baffle spacing recommended in a shell and tube heat exchanger is equal to

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion