Curioustab

Home » Chemical Engineering » Process Equipment and Plant Design

Cooling water fouling factors vary in the range of 0.001 to 0.003

(BTU/hr.ft2 . °F)-1
(kcal/hr.m2 .°C)-1
(W/m2.°K)-1
(kcal/hr. m. °C)-1

Correct Answer: (BTU/hr.ft2 . °F)-1

← Previous Question Next Question→

More Questions from Process Equipment and Plant Design

Optimum reflux ratio in a continuous distillation column is determined by the
Multiple blade paddle agitator is used for mixing high viscosity liquids/paste in which the paddle diameter is commonly 0.8 times the tank diameter. However, the width of the blade is in the range of __________ times the paddle diameter.
Rivets are generally specified by the
An underdesigned steam trap will
The diameter of a propeller agitator used in agitation tank ranges from __________ percent of the tank diameter and its peripherial speed is normally 300 to 500 metres/minute.
Pick out the wrong statement pertaining to the comparative evaluation of performance of the packed tower and the plate tower.
Which of the following factors affect the pressure drop in a co-current gas-liquid absorption packed tower?
Which of the following is not a graphical method (but is an analytical method) for the calculation of theoretical number of stages in case of continuous binary distillation?
Compensation against openings in process vessels for giving inlet and outlet connections, for providing sight glasses and manholes etc. is provided for strength and rigidity. The most efficient type of compensation is of __________ type.
With increase in gas flow rate to fabric surface area ratio (Nm3/hr/m2 fabric surface area), the size & the cost of a bag filter

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion