__________ shaped roof is most commonly used for cylindrical tanks.

More Questions from Process Equipment and Plant Design

• Hold up of material in a operating rotary drier is in the range of
• In case of design of a shell and tube heat exchanger,
• Commercial packed scrubbers are normally designed for a pressure drop range of __________ mm water coloumn per metre of packed height.
• A binary liquid azeotropic mixture has boiling point higher than either of the components, when it shows __________ deviation from Raoult's Law.
• Vertical condenser is advantageous to the horizontal condenser from operation point of view, when
• In common bubble cap distillation column design practice, riser area is approximately equal to (where, Aa = Annular passage area, and Sa = Slot area)
• For storing hazardous chemicals in large storage tanks, the minimum safe distance between the two tanks should range between __________ times the tank diameter.
• Theoretically calculated diameter of the stripping section of the continuous rectification column is __________ that of the enriching section.
• A pressure vessel is said to be made of 'thick' shell, if the ratio of its diameter to wall thickness is
• Rate of filtrate delivery is inversely proportional to the

Discussion & Comments