Curioustab
Aptitude
General Knowledge
Verbal Reasoning
Computer Science
Interview
Aptitude
General Knowledge
Verbal Reasoning
Computer Science
Interview
Home
»
Chemical Engineering
»
Process Equipment and Plant Design
Pick out the wrong statement about routing of fluids in a shell and tube heat exchanger.
The corrosive and fouling fluid should be preferably routed through the tubes.
The viscous fluid should be routed through the shell side.
Lower flow rate fluid should be routed through the shell side.
Higher pressure fluid stream should be routed through the shell side.
Correct Answer:
Higher pressure fluid stream should be routed through the shell side.
← Previous Question
Next Question→
More Questions from
Process Equipment and Plant Design
In a multiple effect evaporator system having 'n' effects, the amount of water evaporated per unit surface area in approximately equal to __________ times that in a single effect.
Pick out the wrong statement about distillation operation
Angled baffles are preferred in the agitation tank to control the swirling action; if the viscosity of the liquid to be mixed is about 200 poise. However, the baffle may be completely eliminated for mixing liquids having viscoisty above __________ poise.
1.2 to 3.8 cms is the value of the
Movement of pipeline caused by thermal expansion is taken care by providing
In most of the shell and tube heat exchangers, the tube pitch is generally __________ the tube diameter.
Bubble cap tray is the most commonly used tray in large distillation column, because
The necessary wall thickness for a metallic storage vessel is a function of the
For identical operating conditions, the pressure drop over __________ tray is the highest out of the following.
Factor of safety (i.e., overdesign factor) in heat transfer equipments is about __________ percent more than the actual/theoretical design factor.
Discussion & Comments
No comments yet. Be the first to comment!
Name:
Comment:
Post Comment
Join Discussion
Discussion & Comments