Curioustab

Home » Chemical Engineering » Process Equipment and Plant Design

The necessary wall thickness for a metallic storage vessel is a function of the

ultimate tensile strength (or yield point) of the material and operating temperature.
operating pressure and welding/joint efficiency.
diameter of the vessel.
all (a); (b) and (c).

Correct Answer: all (a); (b) and (c).

← Previous Question Next Question→

More Questions from Process Equipment and Plant Design

For identical operating conditions, the pressure drop over __________ tray is the highest out of the following.
Factor of safety (i.e., overdesign factor) in heat transfer equipments is about __________ percent more than the actual/theoretical design factor.
Pick out the wrong statement
In a bag filter, the pressure drop increases directly as the
In a distillation column, bubble caps are located on trays with a pitch of __________ times the outside diameter of the caps.
In a shell and tube heat exchanger, triangular pitch arrangement as compared to square pitch arrangement
Which of the following is the best tube material from thermal conductivity point of view alone?
Ratio of tube length to shell diameter for a shell and tube heat exchanger is
For a given fluid, as the pipe diameter increases, the pumping cost
Hole diameter of the seive trays in the distillation column ranges from __________ mm.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion