Curioustab

Home » Chemical Engineering » Process Equipment and Plant Design

Nominal size of a pipe is an indication of its __________ diameter.

inner
outer
approximate
none of these

Correct Answer: approximate

← Previous Question Next Question→

More Questions from Process Equipment and Plant Design

Pressure drop due to pipe fittings can be estimated by the equation, , where, Le = equivalent length of straight pipeline which will incur the same frictional loss as the fitting and D = diameter of the fitting. The value of (dimensionless) for 45° elbow and 180° close return bends would be respectively around
The retention time of material in a rotary dryer depends upon its
Hazards associated with the relief valve leakage for extremely hazardous material storage can be taken care of by providing
The difficulty of liquid distribution in packed towers is accentuated, when the ratio of tower diameter to packing diameter is
The normal range of velocity of steam in pipes is __________ m/sec.
Circumferential (hoop) stress in a thin cylindrical vessel under internal pressure is __________ the longitudinal stress.
In the agitators, the power required will be changed with the increase of diameter of agitator (D) as
With increase in temperature drop (in a shell and tube heat exchanger), the LMTD correction factor, FT
An increase in the liquid resistance to interphase mass transfer and a resultant reduction in plate efficiency is caused by
What is the slope of the operating line in the stripping section of a distillation column?

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion