Curioustab

Home » Chemical Engineering » Process Equipment and Plant Design

Compensation against openings in process vessels for giving inlet and outlet connections, for providing sight glasses and manholes etc. is provided for strength and rigidity. The most efficient type of compensation is of __________ type.

nozzle or rim
flared out
fluid in
ring plate

Correct Answer: nozzle or rim

← Previous Question Next Question→

More Questions from Process Equipment and Plant Design

With increase in gas flow rate to fabric surface area ratio (Nm3/hr/m2 fabric surface area), the size & the cost of a bag filter
Pick out the wrong statement.
Spherical shaped pressure vessel is considered to be the most ideal, because it can
Length to diameter ratio of most rotary driers is in the range of
__________ strain is measured using a 'strain rosetter'.
Number of evaporators which can be used in service in a multiple effect evaporation system is limited by the
The slope of the feed line in distillation opeartion is given by (where, q = fraction of the feed stream that is liquid.)
Generally, no corrosion allowance in wall thickness of a part is required, if the thickness is more than __________ mm.
An adequate clearance between the tray and the shell wall of a distillation column is provided to
In a distillation column, the minimum residence time for liquid in the downspout is about __________ seconds.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion