Curioustab

Home » Biochemical Engineering » Agitation and Aeration

In aerobic microorganisms cultures radial flow impellers are used because

they provide energy efficient high turbulent mixing conditions
they provide low shear mixing conditions
they provide high shear mixing conditions
they ensure that bubble size is maximized leading to high oxygen transfer rates

Correct Answer: they provide high shear mixing conditions

← Previous Question Next Question→

More Questions from Agitation and Aeration

A fermentation system has a KLa of 3 s-1 and a C0* of 5 ppm of O2. If the bulk liquid is saturated with oxygen then the oxygen transfer rate will be equal to
If the stirrer speed is too slow, bubbles will accumulate and coalescese under the impeller. This phenomenon is known as a
A reactor has a total volume of 50,000 litres. If it has a headspace volume of 10,000 litres, then volume of liquid in the reactor will be
Reynolds (Rei) number for the impeller is given by (where Di, stirrer diameter; N, stirrer speed, ρ, density of fluid and μ, viscosity of fluid)
The advantage of axial flow impellers over radial flow impellers is that axial flow impellers
In a bioreactor, if at a particular time the oxygen transfer rate is 23 kg.h-1, then the oxygen uptake will be
In a two-phase system where the continuous phase remains in place, the gas hold up can be expressed as (where Vs and Vt are the superficial gas velocity and bubble rise velocity)
For turbulent flow, Reynolds number is correlated with power number as (where K, a constant which depends on the container geometry and shape of stirrer; Rei, is Reynolds number for agitator; Di, stirrer diameter and N, stirrer speed)
Which of the following will have the largest interfacial area per unit volume?
The effect of increasing the stirrer speed in an unbaffled stirred tank reactor is that

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion