Curioustab

Home » Digital Electronics » Interfacing to the Analog World

On a binary-weighted D/A converter the least significant binary input ________.

connects to the smallest resistor
supplies the least voltage
connects to a 1 kΩ resistor
connects to the largest resistor

Correct Answer: connects to the largest resistor

← Previous Question Next Question→

More Questions from Interfacing to the Analog World

________ ADCs use no clock signal, because there is no timing or sequencing required.
The circuit shown below is a(n) ________.
A counter-ramp ADC uses a comparator to compare the input voltage with ________.
A counter-ramp ADC stops counting when ________.
The main advantage of the tracking A/D converter over the stairstep-ramp A/D converter is that ________.
The circuit shown below is a(n) ________.
The number of binary bits at the input of a DAC or the output of an ADC is known as ________.
The output of the circuit in the given figure (a) at point X on figure (b) will be ________.
________ ADCs have a fixed value of conversion time that is not dependent on the value of the analog input.
A signal ________ is produced by sampling the signal at a rate less than the minimum rate identified by Nyquist.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion