Home » Aptitude » Pipes and Cistern

Water flows into a tank which is 200 m long and 150 m wide, through a pipe of cross-section (0.3m x 0.2m) at 20 km/h. In what time will the water level be 12m ?

200 hrs
240 hrs
300 hrs
270 hrs

Correct Answer: 300 hrs

Explanation:

Volume of water collected in the tank in 1 hour

⇒ (0.3 × 0.2 × 20km × 1000mts) = 1200 m cubic

If after t hours, the water is at height of 12m,

1200t=200×150×12

⇒ t = 300 Hours.

← Previous Question Next Question→

More Questions from Pipes and Cistern

12 buckets of water fill a tank when the capacity of each tank is 13.5 liters. How many buckets will be needed to fill the same tank,if the capacity of each bucket is 9 liters?
One pipe can fill a tank three times as fast as another pipe. If together the two pipes can fill the tank in 36 min, then the slower alone will be able to fill the tank in:
Two pipes A and B can fill a tank in 16 hrs and 12 hrs respectively. The capacity of the tank is 240 liters. Both the pipes are opened simultaneously and closed after 2 hrs. How much more water need to fill the tank?
A large tanker can be filled by two pipes A and B in 60 and 40 minutes respectively. How many minutes will it take to fill the tanker from empty state if B is used for half the time and A and B fill it together for the other half ?
Pipe A is an inlet pipe that can fill an empty cistern in 69 hours. Pipe B can drain the filled cistern in 46hours. When the cistern was filled the two pipes are opened one at a time for an hour each, starting withPipe B. how long will it take for the cistern to be empty?
Taps X and Y can fill a tank in 30 and 40 minutes respectively.Tap Z can empty the filled tank in 60 minutes.If all the three taps are kept open for one minute each,how much time will the taps take to fill the tank?
The capacity of a tank is 2400 m3 . A pump can be used both for filling and emptying the tank. The emptying capacity of the pump is 10 m3/minute higher than its filling capacity. And also, the pump needs 8 minutes less to empty the tank than to fill it. Find the filling capacity of the pump.
Pipe A can fill a tank in 16 minutes and pipe B cam empty it in 24 minutes. If both the pipes are opened together after how many minutes should pipe B be closed, so that the tank is filled in 30 minutes ?
The ratio of efficiencies of two filling pipes is 4 : 5. There is a third emptying pipe which efficiency is two third of the average efficiency of first two filling pipes can empty a filled tank in 36 minutes. In how much time both the filling pipes can fill the tank when it is empty?
A tap can fill a tank in 6 hours. After half the tank is filled three more similar taps are opened. What is the total time taken to fill the tank completely ?

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion