Home » Aptitude » Pipes and Cistern

Taps X and Y can fill a tank in 30 and 40 minutes respectively.Tap Z can empty the filled tank in 60 minutes.If all the three taps are kept open for one minute each,how much time will the taps take to fill the tank?

48min
72min
24min
None of these

Correct Answer: 24min

Explanation:

Given taps X and Y can fill the tank in 30 and 40 minutes respectively. Therefore,

part filled by tap X in 1 minute = 1/30

part filled by tap Y in 1 minute = 1/40

Tap Z can empty the tank in 60 minutes. Therefore,

part emptied by tap Z in 1 minute = 1/60

Net part filled by Pipes X,Y,Z together in 1 minute = [1/30 +1/40 - 1/60] = 5/120 = 1/24

i.e., the tank can be filled in 24 minutes.

← Previous Question Next Question→

More Questions from Pipes and Cistern

The capacity of a tank is 2400 m3 . A pump can be used both for filling and emptying the tank. The emptying capacity of the pump is 10 m3/minute higher than its filling capacity. And also, the pump needs 8 minutes less to empty the tank than to fill it. Find the filling capacity of the pump.
Pipe A can fill a tank in 16 minutes and pipe B cam empty it in 24 minutes. If both the pipes are opened together after how many minutes should pipe B be closed, so that the tank is filled in 30 minutes ?
The ratio of efficiencies of two filling pipes is 4 : 5. There is a third emptying pipe which efficiency is two third of the average efficiency of first two filling pipes can empty a filled tank in 36 minutes. In how much time both the filling pipes can fill the tank when it is empty?
A tap can fill a tank in 6 hours. After half the tank is filled three more similar taps are opened. What is the total time taken to fill the tank completely ?
One fill pipe A is 3 times faster than second fill pipe B and takes 32 minutes less than the fill pipe B. When will the cistern be full if both pipes are opened together?
A water tank in a village is normally filled in 8 hours but takes 2 hours longer to fill because of a leak in its bottom. If the tank is full, in how many hrs will the leak empty it ?
Three taps I, J and K can fill a tank in 20,30and 40 minutes respectively. All the taps are opened simultaneously and after 5 minutes tap A was closed and then after 6 minutes tab B was closed .At the moment a leak developed which can empty the full tank in 70 minutes. What is the total time taken for the completely full ?
A cistern has a leak which would empty the cistern in 20 minutes. A tap is turned on which admits 4 liters a minute into the cistern, and it is emptied in 24 minutes. How many liters does the cistern hold ?
Two filling taps P and Q together can fill a tank with rate of 40 lit/min and 60 lit/min respectively in 8 min. If a waste tap can empty the filled tank in 32 min, then what is the rate of waste tap ?
Pipe K fills a tank in 30 minutes. Pipe L can fill the same tank 5 times as fast as pipe K. If both the pipes were kept open when the tank is empty, how much time will it take for the tank to overflow ?

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion