Curioustab

Home » Chemical Engineering » Petroleum Refinery Engineering

Which parameter is used for the grading of paraffin waxes?

Specific gravity
Melting point
Viscosity
Penetration number

Correct Answer: Viscosity

← Previous Question Next Question→

More Questions from Petroleum Refinery Engineering

Higher boiling fractions like atmospheric residue is distilled under vacuum at low temperature because at high temperature, there is a tendency of the predominance of
Tetraethyl lead is added to the petrol to increase its octane number, because its octane number is
Which of the following gasolines (unleaded) has the least octane number?
Asphalts are
Salt content (measured as sodium chloride) in electrically desalted crude oil comes down to a level of about __________ ptb (pounds per thousand barrel).
Products drawn from the top to bottom of the crude oil distillation column has progressively increasing
Char value of Kerosene is the amount of charred oil deposition on the wick obtained after burning it in a standard wick lamp at a standard rate for 24 hours. Char value of a good quality kerosene should be less than __________ mg/kg of kerosene.
Which of the following is the most important property for a jet fuel?
The most important property for a jet fuel is its
Which of the following reactions is undesirable in the production of catalytically reformed gasoline?

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion