Curioustab

Home » Digital Electronics » Combinational Logic Circuits

When an open occurs on the input of a TTL device, the output will ________.

go LOW, because there is no current in an open circuit
react as if the open input were a HIGH
go HIGH, since full voltage appears across an open
still be good, if only the good inputs are used

Correct Answer: react as if the open input were a HIGH

← Previous Question Next Question→

More Questions from Combinational Logic Circuits

A half-adder does not have ________.
Occasionally, a particular logic expression will be of no consequence in the operation of a circuit, such as in a BCD-to-decimal converter. These result in ________ terms in the K-map and can be treated as either ________ or ________, in order to ________ the resulting term.
The equation ________ cannot be further simplified.
The Boolean equation ________ results from this Karnaugh map.
Two 4-bit comparators are cascaded to form an 8-bit comparator. The cascading inputs of the most significant 4 bits should be connected ________.
The AND-OR-INVERT gates are designed to simplify implementation of ________.
The Boolean equation ________ results from this Karnaugh map.
The final output of a POS circuit is generated by ________.
When Karnaugh mapping, we must be sure to use the ________ number of loops.
To subtract a signed number (the subtrahend) from another signed number (the minuend) in the 2's complement system, the minuend is ________.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion