Curioustab

Home » Chemical Engineering » Process Equipment and Plant Design

The thickness of segmental baffles (25 -35% cut truncated plates usually) is generally __________ the tube wall thickness.

equal to
twice
four times
half

Correct Answer: twice

← Previous Question Next Question→

More Questions from Process Equipment and Plant Design

In a multipass shell and tube heat exchanger, the baffles on shell side is primarily provided for
Mc Cable Thiele method used for finding theoretical stages in a distillation column assumes that the
What is the value of 'q' for saturated vapor feed to a distillation column?(where q = fraction of the feed stream that is liquid.)
for 90° elbow (medium radius) and 90°square elbow would be respectively around
For a 25 mm hole drilled in plates to be rivetted, the shank diameter of the rivet should be __________ mm.
In a shell and tube heat exchanger for a given heat transfer surface area, smaller diameter tubes are favoured as compared to larger diameter ones ; because the smaller diameter tubes
__________ closure is the weakest enclosure for cylindrical vessels.
In hydrostatic testing of welded pipe (for leakage, strength etc.) the ratio of minimum hydrostatic test pressure to internal design pressure is around
In a pressure vessel containing multiple openings of various dimensions at different parts, stress concentration at the edges of the opening is maximum which becomes negligibly small beyond the area covered by __________ times the hole diameter.
Pick out the wrong statement.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion