logo

CuriousTab

CuriousTab

Waste Water Engineering problems


  • 1. Fresh sewage may become stale in

  • Options
  • A. one hour
  • B. two to three hours
  • C. three to four hours
  • D. six hours.
  • E. ten hours.
  • Discuss
  • 2. The liquid wastes from kitchens, bath rooms and wash basins, is not called

  • Options
  • A. liquid waste
  • B. sullage
  • C. sewage
  • D. none of these.
  • Discuss
  • 3. Rate of flow of sewage is generally assumed

  • Options
  • A. more than the rate of water supply
  • B. equal to the rate of water supply
  • C. less than the rate of water supply
  • D. at 150 litres per capita.
  • Discuss
  • 4. Which one of the following tests is used for testing sewer pipes :

  • Options
  • A. water test
  • B. ball test
  • C. mirror test
  • D. all of these.
  • Discuss
  • 5. Hydraulic mean radius is

  • Options
  • A. mean radius of sewer
  • B. difference in heads between two points in circular pipes
  • C. mean of radii in a pipe line of varying cross-sections
  • D. cross-sectional area/wetted perimeter.
  • Discuss
  • 6. A sewer running partially full and hurried with back filled, fails in compression due to

  • Options
  • A. weight of the pipe
  • B. weight of the back fill
  • C. superimposed traffic loads
  • D. all the above.
  • Discuss
  • 7. In septic tanks,

  • Options
  • A. free board of 0.3 m may be provided
  • B. the baffles or tees are extended up to top level of scum
  • C. the clear space between the baffle top and covering slab is about 7.5 cm
  • D. the inlet is kept 30 cm below the sewage line and outlet is kept at a level 40% depth of the sewage
  • E. all the above.
  • Discuss
  • 8. To prevent settling down of sewage both at the bottom and on the sides of a large sewer, self-cleaning velocity recommended for Indian conditions, is

  • Options
  • A. 0.50 m/sec
  • B. 0.60 m/sec
  • C. 0.70 m/sec
  • D. 0.75 m/sec
  • E. 1.0 m/sec.
  • Discuss
  • 9. The sewer pipe which carries sewage from a building for immediate disposal is

  • Options
  • A. house sewer
  • B. lateral sewer
  • C. intercepting sewer
  • D. main sewer.
  • Discuss
  • 10. A manhole is classified as shallow if its depth is between

  • Options
  • A. 0.4 to 0.5 m
  • B. 0.5 to 0.7 m
  • C. 0.7 to 0.9 m
  • D. 0.9 to 1.20 m
  • E. 1.2 to 1.50 m.
  • Discuss

First 7 8 9 ... 20 .. 31 32 Last