For a beam, as shown in the below figure, the maximum deflection is .

More Questions from Strength of Materials

• In order to prevent crushing of masonry at the base of the dam, the maximum stress should be __________ the permissible stress of the soil.
• Strain resetters are used to
• A steel bar of 5 mm is heated from 15° C to 40° C and it is free to expand. The bar Will induce
• The strain energy stored in a solid circular shaft subjected to shear stress (τ) is (where C = Modulus of rigidity for the shaft material)
• The deformation per unit length is called
• A vertical column has two moments of inertia (i.e. Ixx and Iyy ). The column will tend to buckle in the direction of the
• A beam supported at its both ends is not a simply supported beam.
• A thin cylindrical shell of diameter (d) and thickness (t) is subjected to an internal pressure (p). The ratio of longitudinal strain to volumetric strain is
• The stress induced in a body, when suddenly loaded, is __________ the stress induced when the same load is applied gradually.
• When a body is subjected to two equal and opposite pushes, as a result of which the body tends to reduce its length, the stress and strain induced is compressive.

Discussion & Comments