Curioustab

Home » Digital Electronics » Integrated-Circuit Logic Families

A logic probe is placed on the input of a digital circuit and the probe lamp blinks slowly, indicating ________.

that an open or bad logic level exists
a high level output
a high-frequency pulse train
that the supply voltage is low

Correct Answer: a high-frequency pulse train

← Previous Question Next Question→

More Questions from Integrated-Circuit Logic Families

The lower transistor of a totem-pole output is saturated when the gate output is ________.
Several manufacturers have developed logic that combines the best features of TTL and CMOS. This is called ________.
________ output levels would not be a valid LOW for a TTL gate.
The output stage of a TTL gate is a special design called ________.
When VGS = 0 on an N-channel MOSFET switch, there is no ________ between the source and the drain.
The proliferation of small handheld consumer equipment such as digital video cameras, cellular phones, handheld computers (________), portable audio systems, and other devices has created a need for logic circuits in very small packages.
Fan-out for a typical TTL gate is ________.
The time it takes for an input signal to pass through internal circuitry and generate the appropriate output effect is known as ________.
P-MOS and N-MOS ________.
An open-collector TTL gate ________.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion