Curioustab

Home » Chemical Engineering » Process Control and Instrumentation

__________ is an example of distributed parameter system

Tubular reactor
CSTR
On-off controller
none of these

Correct Answer: Tubular reactor

← Previous Question Next Question→

More Questions from Process Control and Instrumentation

"An emf of the order of mV is generated when two solutions of different hydrogen ion concentration are separated by a thin glass wall". This is the working principle of a
Silver point temperature is __________ °C.
Platinum resistance thermometer can be used upto antimony point which is __________ °C, and is the temperature of equilibrium between solid antimony & liquid antimony at normal atmospheric pressure.
Block diagram of a simple standard control system is shown below in the figure. Which of the following statement about the above control system is wrong?
Bimetal strips are not used in
Temperature control of an exothermic chemical reaction taking place in a CSTR is done with the help of cooling water flowing in a jacket around the reactor. The types of valve and controller action to be recommended are
Mcleoid gauge is used to measure the
A non-linear system will have __________ steady state values.
Which of the following thermocouples is capable of measuring a temperature of -50°C?
Photoelectric pyrometers are suitable in the temperature range of __________ °C.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion