The voltage out when a 10 kΩ load is connected is 5.7 volts.

More Questions from Series-Parallel Circuits

• The current through R6 is 8.5 mA.
• Observed voltages not being shared identify components in parallel in a series–parallel circuit.
• If the output voltage of a certain loaded voltage divider is 12 V, the output voltage might decrease when the load is removed.
• The loading effect of a voltmeter can be ignored if ____.
• If a Wheatstone bridge is balanced, its output voltage is ____.
• In the given circuit, the current flowing through R3 equals ______.
• Series components in a series–parallel circuit may be in series with other _______________ components, or with other _______________ components.
• In the given circuit, the total resistance (RT) between points A and B equals _____.
• When a load is connected to a voltage divider, the total resistance of the circuit will ________.
• If four 10 kΩ resistors are in series with a single 20 kΩ resistor and one of the parallel resistors shorts, the voltage across the other parallel resistors ________.

Discussion & Comments