Curioustab

Home » Electronics » Bipolar Junction Transistors (BJT)

The voltage measured from the collector to the emitter is the sum of the base-emitter voltage plus the collector-base voltage.

True

Correct Answer: True

← Previous Question Next Question→

More Questions from Bipolar Junction Transistors (BJT)

In a BJT, the collector current is approximately equal to the base current.
When troubleshooting a bipolar junction transistor using an ohmmeter, if one of the junctions reads low in both directions, the junction is shorted and the transistor is bad. If one of the junctions reads high in both directions, the junction is shorted and the transistor is good.
Base bias provides _________.
The signal voltage gain of an amplifier, AV, is defined as __________.
The input resistance, Rin of a common-collector amplifier, consists of ____________.
VCE approximately equals ________ when a transistor switch is in saturation.
An emitter-follower has a voltage gain that is __________.
VCE approximately equals ________ when a transistor switch is cut off.
The phase difference between the input and output ac voltage signals of a common-emitter amplifier is __________.
The input resistance of the base of an emitter-follower is usually _________.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion