Curioustab

Home » Electronics and Communication Engineering » Analog Electronics

In figure what is the base current if VBE = 0.7 V

10 mA
9.3 mA
10 μA
9.3 μA

Correct Answer: 9.3 μA

Explanation:

.

← Previous Question Next Question→

More Questions from Analog Electronics

The load impedance ZL of a CE amplifier has R and L in series. The phase difference between output and input will be
An amplifier with loop gain Aβ will be more stable for value of Aβ as
A bridge rectifier circuit has input of 50 Hz frequency. The load resistance is RL and filter capacitance is C. For good output wave shape, the time constant RLC should be at least equal to
In figure The minimum and maximum load currents are
An exponential amplifier has diode in feedback path.
Consider the following statements : A clamper circuit adds or subtracts a dc voltage to a waveform does not change the waveform amplifiers the waveform Which are correct?
Gain of the amplifier is 'A'. Then the I/P impedance and O/P impedance of the closed loop amplifier shown below would be
In a CE amplifier the input impedance is equal to the ratio of
A CB amplifier has re = 6 Ω, RL = 600 Ω and a = 0.98. The voltage gain is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion