Curioustab

Home » Electrical Engineering » Transformers

When a 200 Ω load resistor is connected across the secondary winding of a transformer with a turns ratio of 4, the source "sees" a reflective load of

50 Ω
12.5 Ω
800 Ω
0 Ω

Correct Answer: 12.5 Ω

← Previous Question Next Question→

More Questions from Transformers

What kVA rating is required for a transformer that must handle a maximum load current of 8 A with a secondary voltage of 2 kV?
The primary winding of a transformer has 110 V ac across it. What is the secondary voltage if the turns ratio is 8?
If a transformer has 50 turns in the primary winding and 10 turns in the secondary winding, what is the reflective resistance if the secondary load resistance is 250 Ω?
To step 120 V ac up to 900 V ac, the turns ratio must be
A certain amplifier has 600 Ω internal resistance looking from its output. In order to provide maximum power to a 4 Ω speaker, what turns ratio must be used in the coupling transformer?
The mutual inductance when k = 0.65, L1 = 2 µH, and L2 = 5 µH is
The turns ratio required to match an 80 Ω source to a 320 Ω load is
A transformer
The primary winding of a power transformer should always be
The primary coil of a transformer is connected to a 60 V ac source. The secondary coil is connected to a 330 Ω load. The turns ratio is 3:1. What is the secondary voltage?

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion