Curioustab

Home » Electrical Engineering » Time Response of Reactive Circuits

Referring to Problem 5, how long will it take the capacitor to discharge if the internal resistance of the pulse source is 100 Ω?

300 µs
600 µs
900 µs
1.5 ms

Correct Answer: 1.5 ms

← Previous Question Next Question→

More Questions from Time Response of Reactive Circuits

When a 15 V input pulse with a width equal to two time constants is applied to an RC integrator, the capacitor charges to
Referring to the above figure, determine the voltage level that the output will reach during the pulse.
When a 12 V input pulse with a width equal to one time constant is applied to an RC integrator, the capacitor charges to
In electronic systems, repetitive-pulse waveforms are encountered
An integrator consists of a 3.3 kΩ resistor and a 2 µF capacitor. A single 30 V, 6 ms pulse is applied to the input. How much will the capacitor charge?
A single 6 V pulse with a width of 600 µs is applied to an integrator consisting of a 150 kΩ resistor and a 0.002 µF capacitor. To what voltage will the capacitor charge?
The output of an RC integrator is taken across the
Referring to the give circuit, the output will
An RC differentiator acts as a
The flat portions of a pulse waveform contain low-frequency components.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion