Home » Electrical Engineering » Passive Filters

In a certain low-pass filter, fc = 3.5 kHz. Its passband is

0 Hz to 3.5 kHz
0 Hz
3.5 kHz
7 kHz

Correct Answer: 0 Hz to 3.5 kHz

← Previous Question Next Question→

More Questions from Passive Filters

A parallel resonant band-pass filter consists of a 6.8 Ω resistor in series with a parallel network made up of an 8 µH coil and a 120 pF capacitor. The output is taken across the capacitor/coil. Assume RW = 0 Ω. What is the center frequency of the filter?
Referring to Problem 8, assume the input voltage is 15 V ac. What is the output voltage at the critical frequency,fc?
Referring to Problem 21, the filter's bandwidth is
A parallel resonant band-pass filter consists of a 90 Ω resistor in series with a parallel network made up of a 60 mH coil and a 0.02 µF capacitor. The output is taken across the capacitor/coil. The coil winding has a resistance of 20 Ω. What is the center frequency of the filter?
An RL low-pass filter consists of a 5.6 mH coil and a 3.3 kΩ resistor. The output voltage is taken across the resistor. The circuit's critical frequency is
An RL high-pass filter consists of a 470 Ω resistor and a 600 mH coil. The output is taken across the coil. The circuit's critical frequency is
Referring to Problem 8, assume the input voltage is 15 V dc. What is the output voltage?
At a certain frequency, the output voltage of a filter is 6 V and the input is 12 V. The voltage ratio in decibels is
An RC high-pass filter consists of an 820 Ω resistor. What is the value of C so that Xc is ten times less than R at an input frequency of 12 kHz?
A sinusoidal voltage with a peak-to-peak value of 18 V is applied to an RC low-pass filter. If the reactance at the input frequency is zero, the output voltage is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion