Curioustab
Aptitude
General Knowledge
Verbal Reasoning
Computer Science
Interview
Aptitude
General Knowledge
Verbal Reasoning
Computer Science
Interview
Home
»
Electrical Engineering
»
Inductors
Two 10 H inductors are in parallel and the parallel combination is in series with a third 10 H inductor. What is the approximate total reactance when a voltage with a frequency of 7 kHz is applied across the circuit terminals?
219 kΩ
66 kΩ
660 kΩ
1.3 MΩ
Correct Answer:
660 kΩ
← Previous Question
Next Question→
More Questions from
Inductors
The inductance of an iron-core coil decreases if
Two inductors, L1 and L2, are in parallel. L1 has a value of 25 µH and L2 a value of 50 µH. The parallel combination is in series with L3, a 20 µH coil. The entire combination is across an ac source of 60 Vrms at 300 kHz. The total rms current is
Three 15 mH inductors are in series. The total inductance is
The following coils are in parallel: 75 µH, 40 µH, 25 µH, and 15 µH. The total inductance is approximately
A switch, a 220 Ω resistor, and a 60 mH inductor are in series across a 20 V battery. What is the current through the inductor two time constants after the switch is closed?
An 18 V power supply is connected across a coil with a winding resistance of 180 Ω. Current flow in the coil is
A 5 mH, a 4.3 mH, and a 0.6 mH inductor are connected in parallel. The total inductance is
When the current through an inductor decreases, the amount of energy stored in the electromagnetic field
An inductor, a 1 kΩ resistor, and a switch are connected in series across a 6 V battery. At the instant the switch is closed, the inductor voltage is
An inductor and a resistor are in series with a sine wave voltage source. The frequency is set so that the inductive reactance is equal to the resistance. If the frequency is increased, then
Discussion & Comments
No comments yet. Be the first to comment!
Name:
Comment:
Post Comment
Join Discussion
Discussion & Comments