Curioustab

Home » Chemical Engineering » Environmental Engineering

Dose of chlorine for disinfection of water is about __________ mg/litre of water.

0.01
0.1
0.3
1

Correct Answer: 1

← Previous Question Next Question→

More Questions from Environmental Engineering

What are the methods of treatment & disposal of radioactive wastes?
Particles having diameter greater than 75 μm (micrometer = 10-6 mm) are called
Sound produced by an automobile horn heard at a distance of 1.5 metres corresponds to about __________ decibels.
Foul odour and bad taste of water is removed by treating with
Presence of __________ hardness is responsible for the temporary hardness in water.
Most efficient and suitable dust removal equipment for removal of flyash from flue gas in a thermal power plant is the
Methyl iso-cynate (MIC) gas (TLV <1 ppm), which caused Bhopal gas tragedy in 1984 falls under the category of __________ toxic gas.
Oil and grease present in an emulsified state in waste water discharged from industries can be removed by
Presence of soluble organics in polluted water causes
Noise produced by cooling fans (employed in air cooled heat exchangers or cooling tower) is mainly caused due to the turbulence created by blade passage through air. It can be reduced by use of a slower fan

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion