logo

CuriousTab

CuriousTab

Discussion


Home Electronics Arithmetic Operations and Circuits Comments

  • Question
  • The 2's complement of 1101102 is _________.


  • Options
  • A. 1101002
  • B. 1010102
  • C. 0010112
  • D. 0010102

  • Correct Answer
  • 0010102 


  • Arithmetic Operations and Circuits problems


    Search Results


    • 1. The operands in an addition operation consist of the augend and the addend.

    • Options
    • A. True
    • B. False
    • Discuss
    • 2. The operands in a subtraction operation are the subend and the minuend.

    • Options
    • A. True
    • B. False
    • Discuss
    • 3. A full adder adds three bits, a half adder adds 1-1/2 bits.

    • Options
    • A. True
    • B. False
    • Discuss
    • 4. End around carry is an operation in 1's complement subtraction where a 1 is added to the sum of the 1's complement of both numbers.

    • Options
    • A. True
    • B. False
    • Discuss
    • 5. Using the two's complement number system we can add numbers with like signs and obtain the correct result.

    • Options
    • A. True
    • B. False
    • Discuss
    • 6. A full adder adds ____.

    • Options
    • A. two 2-bit binary numbers
    • B. two 4-bit binary numbers
    • C. two single bits and one carry bit
    • D. two 2-bit numbers and one carry bit
    • Discuss
    • 7. The carry propagation delay in 4-bit full-adder circuits ____________.

    • Options
    • A. is normally not a consideration because the delays are usually in the nanosecond range
    • B. is cumulative for each stage and limits the speed at which arithmetic operations are performed
    • C. decreases in direct ratio to the total number of full-adder stages
    • D. increases in direct ratio to the total number of full-adder stages, but is not a factor in limiting the speed of arithmetic operations
    • Discuss
    • 8. All digital systems that perform arithmetic operations must indicate _______ and ________ for numbers.

    • Options
    • A. size, base
    • B. sign, magnitude
    • C. sign, base
    • D. magnitude, base
    • Discuss
    • 9. An input to the mode pin of an arithmetic-logic unit (ALU) determines if the function will be _________.

    • Options
    • A. one's complemented
    • B. positive or negative
    • C. with or without carry
    • D. arithmetic or logic
    • Discuss
    • 10. In binary number systems the sign of a number is indicated by _________.

    • Options
    • A. using a 0 (zero) bit in front of negative numbers
    • B. inverting the bits if the number is negative
    • C. including a sign bit along with the magnitude bits
    • D. placing a negative sign in front of the number
    • Discuss


    Comments

    There are no comments.

Enter a new Comment