logo

CuriousTab

CuriousTab

Discussion

Home ‣ Electronics ‣ Time Response of Reactive Circuits Comments
  • Question

  • The output of an RC differentiator is taken from across the capacitor.


  • Options
  • A. True
  • B. False

  • Correct Answer
  • False 

    • Time Response of Reactive Circuits problems

    Search Results

    • 1. The steady-state condition of an integrator is reached after 5 time constants regardless of the number of input pulses that occur in that amount of time.

    • Options
    • A. True
    • B. False
      • Discuss
    • 2. The output of a differentiator could be considered a spike when the input pulse width is much longer than 5 time constants.

    • Options
    • A. True
    • B. False
      • Discuss
    • 3. The output voltage of a differentiator goes negative on the falling edge of the input pulse.

    • Options
    • A. True
    • B. False
      • Discuss
    • 4. The voltage across a capacitor in an RC integrator circuit cannot change exponentially; it can change only instantaneously.

    • Options
    • A. True
    • B. False
      • Discuss
    • 5. During the steady-state condition of a differentiator, the average output voltage is zero volts.

    • Options
    • A. True
    • B. False
      • Discuss
    • 6. If the output of an RC integrator is zero volts, the capacitor might be open.

    • Options
    • A. True
    • B. False
      • Discuss
    • 7. A repetitive pulse with a 50% duty cycle is being applied to the input of an RC integrator. If one time constant is less than one-fifth the pulse width, the capacitor will be able to fully charge and discharge.

    • Options
    • A. True
    • B. False
      • Discuss
    • 8. The output of an RL differentiator is taken from across the inductor.

    • Options
    • A. True
    • B. False
      • Discuss
    • 9. If a repetitive-pulse waveform is applied to an RC integrator, the output waveshape depends on the relationship of the circuit time constant and the duty cycle of the input pulses.

    • Options
    • A. True
    • B. False
      • Discuss
    • 10. For a capacitor to completely charge in an RC integrator, the pulse width must be _____ 5 time constants.

    • Options
    • A. less than
    • B. greater than
    • C. equal to
    • D. greater than or equal to
      • Discuss

    Comments

    There are no comments.
Enter a new Comment




Aptitude

Engineering

Programming

Reasoning

Links

Copyright ©CuriousTab. All rights reserved.