logo

CuriousTab

CuriousTab

Discussion


Home Chemical Engineering Environmental Engineering See What Others Are Saying!
  • Question
  • Sooty and sulphurous smog formed due to combustion of fossil fuels particularly in winter, continues throughout the day and night. When the moist atmospheric air's water vapor condenses on the solid particles of smoke thereby forming smog (smoke + fog), it causes


  • Options
  • A. poor visibility due to sky darkening.
  • B. irritation in eyes.
  • C. respiratory trouble.
  • D. all (a), (b) and (c).

  • Correct Answer
  • all (a), (b) and (c). 


  • More questions

    • 1. Unit of mass velocity is

    • Options
    • A. kg/m . hr
    • B. kg/m2.hr
    • C. kg/hr
    • D. kg/m2
    • Discuss
    • 2. As per Kirchoff s equation, the heat of reaction is affected by the

    • Options
    • A. pressure
    • B. volume
    • C. temperature
    • D. molecularity
    • Discuss
    • 3. Which of the following is not a component of the fixed capital for a chemical plant facility?

    • Options
    • A. Raw materials inventory.
    • B. Utilities plants.
    • C. Process equipment.
    • D. Emergency facilities.
    • Discuss
    • 4. Dust laden air can be purified using a

    • Options
    • A. cyclone separator
    • B. bag filter
    • C. gravity settler
    • D. tubular centrifuge
    • Discuss
    • 5. Nylon-66 compared to nylon-6 has

    • Options
    • A. lower melting point.
    • B. more abrasion resistant properties.
    • C. higher hardness.
    • D. all (a), (b) and (c).
    • Discuss
    • 6. The transfer function for a PID controller is (where, ? i is the integral (reset) time and ?D is the derivative time.)

    • Options
    • A. Kc(1 + ?is + ?D ). s
    • B.
    • C.
    • D.
    • Discuss
    • 7. Shock resisting steels should possess high

    • Options
    • A. hardness
    • B. toughness
    • C. tensile strength
    • D. wear resistance
    • Discuss
    • 8. The optimum moisture content in solids to be crushed/ground ranges from __________ percent.

    • Options
    • A. 3 to 4
    • B. 8 to 10
    • C. 10 to 15
    • D. 15 to 20
    • Discuss
    • 9. If a single tube pass heat exchanger is converted to two passes; for the same flow rate, the pressure drop per unit length in tube side will __________ times.

    • Options
    • A. increase by 1.8
    • B. decrease by 22
    • C. increase by 21.6
    • D. none of these
    • Discuss
    • 10. For a given mass of a gas at constant temperature, if the volume 'V' becomes three times, then the pressure 'P' will become

    • Options
    • A. P/3
    • B. 3P
    • C. 9P2
    • D. 9P
    • Discuss


    Comments

    There are no comments.

Enter a new Comment