logo

CuriousTab

CuriousTab

Discussion


Home Chemical Engineering Mechanical Operations Comments

  • Question
  • For classification of potable (drinking) water, we use a __________ filter.


  • Options
  • A. gravity sand
  • B. plate and frame
  • C. vacuum leaf
  • D. rotary vacuum

  • Correct Answer
  • gravity sand 


  • Mechanical Operations problems


    Search Results


    • 1. Which of the following may prove unsuitable for filtering volatile liquids?

    • Options
    • A. Pressure filter
    • B. Gravity filter
    • C. Centrifugal filter
    • D. Vacuum filter
    • Discuss
    • 2. For coarse reduction of hard solids, use

    • Options
    • A. impact
    • B. attrition
    • C. compression
    • D. cutting
    • Discuss
    • 3. Which of the following crushing laws is most accurately applicable to the fine grinding of materials?

    • Options
    • A. Bond's crushing law
    • B. Kick's law
    • C. Rittinger's law
    • D. None of these.
    • Discuss
    • 4. As per Taggart's formula, the capacity (kg/hr) of Jaw & Gyratory crushers (for gapes of 10 to 60 cms) is equal to (where, L = Length of feed opening, cms S = Maximum width of discharge opening, cms )

    • Options
    • A. LS
    • B. 93 LS
    • C. 250 LS
    • D. LS
    • Discuss
    • 5. Which of the following achieves the least reduction ratio for a given feed size?

    • Options
    • A. Jaw crusher
    • B. Roll crusher
    • C. Cone crusher
    • D. Gyratory crusher
    • Discuss
    • 6. Sizing of very fine particles of the order of 5 to 10 microns is done by elutriation, which is a __________ operation.

    • Options
    • A. clarification
    • B. sedimentation
    • C. flocculation
    • D. classification
    • Discuss
    • 7. __________ mean diameter of particles is given by

    • Options
    • A. Mass
    • B. volume
    • C. Arithmetic
    • D. Volume surface
    • Discuss
    • 8. Vibrating screens have capacity in the range of __________ tons/ft2 .mm mesh size.

    • Options
    • A. 0.2 to 0.8
    • B. 5 to 25
    • C. 50 to 100
    • D. 100 to 250
    • Discuss
    • 9. Cake resistance is

    • Options
    • A. important in the beginning of filtration.
    • B. decreased with the time of filtration.
    • C. independent of pressure drop.
    • D. none of these.
    • Discuss
    • 10. __________ is used for producing a thick suspension from a thin slurry.

    • Options
    • A. Cartridge filter
    • B. Rotary drum vacuum filter
    • C. Pressure filter thickener
    • D. Plate and frame filter press
    • Discuss


    Comments

    There are no comments.

Enter a new Comment