Discussion
Home ‣ Chemical Engineering ‣ Polymer Technology Comments
- Question
Typical solvent polymerisation reaction conditions for the production of high density polythene by Zeigler process is
Options- A. 7 kgf/cm2 and 70 °C.
- B. 1000 kgf/cm2 and 100°C.
- C. 7 kgf/cm2 and 700°C.
- D. 1 kgf/cm2 (gage) and 70°C.
- Correct Answer
- 7 kgf/cm2 and 70 °C.
- 1. Cross linked polymers are
Options- A. thermoplastic
- B. thermosetting
- C. either (a) or (b)
- D. fibres only Discuss
- 2. Vulcanisation of rubber does not increase its
Options- A. softness
- B. oxidation resistance
- C. weight & strength
- D. elasticity & water solubility Discuss
- 3. The process involved in converting rubber into a thin sheet or coating it on fabric is called
Options- A. extrusion
- B. mastication
- C. calendering
- D. vulcanisation Discuss
- 4. Scouring is a finishing operation during the manufacture of fibre, which aims at __________ of fibres.
Options- A. improving the stretchability
- B. dyeing/colouring
- C. detergent solution washing
- D. glycol soaking Discuss
- 5. Acrilan fibres used for making cloth, carpet & blankets, which is a hard, horny & high melting polymeric material is nothing but
Options- A. polyacrylonitrile
- B. polyamide
- C. saturated polyester
- D. alkyd resin Discuss
- 6. In a linear polymer, the monomeric units are linked together to form long straight chains. The cross linked or branched chain polymers compared to linear polymers have higher
Options- A. densities
- B. melting point
- C. tensile strength
- D. hardness, rigidity & brittleness Discuss
- 7. Nylon-66 is manufactured from
Options- A. adipic acid and hexamenthylene diamine.
- B. caprolactum.
- C. maleic anhydride and hexamethylene diamine.
- D. dimethyl terephthalate (DMT) and ethylene glycol. Discuss
- 8. Cation exchange resins used in water treatment is made from __________ resin.
Options- A. urea formaldehyde
- B. epoxy
- C. amino
- D. phenolic Discuss
- 9. Melt spinning of polymers involves the forcing of polymer melt through spinnerettes (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter polymer melt to harden into filaments. Melt spinning is not used in case of the __________ fibres.
Options- A. acrylic
- B. polyester
- C. nylon 6:6
- D. polypropylene Discuss
- 10. Which of the following is not a natural polymer?
Options- A. Nucleic acids e.g. RNA and DNA
- B. Polysaccharides
- C. Polyisoprene
- D. Polyurethane Discuss
Polymer Technology problems
Search Results
Correct Answer: thermosetting
Correct Answer: softness
Correct Answer: calendering
Correct Answer: detergent solution washing
Correct Answer: polyacrylonitrile
Correct Answer: hardness, rigidity & brittleness
Correct Answer: adipic acid and hexamenthylene diamine.
Correct Answer: urea formaldehyde
Correct Answer: acrylic
Correct Answer: Polyurethane
Comments
There are no comments.More in Chemical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.