logo

CuriousTab

CuriousTab

Discussion


Home Computer Science Computer Hardware Comments

  • Question
  • A Type 1 PCMCIA card is:


  • Options
  • A. The same physical size as other PCMCIA cards but configured differently
  • B. The thinnest PCMCIA card, measuring 3.5mm in thickness
  • C. The thickest PCMCIA card, measuring 10.5mm in thickness
  • D. An old standard that is not compatible with the newest laptops
  • E. None of the above

  • Correct Answer
  • The thinnest PCMCIA card, measuring 3.5mm in thickness 


  • Computer Hardware problems


    Search Results


    • 1. Which is the most difficult environmentally to dispose of?

    • Options
    • A. floppy drives
    • B. hard drives
    • C. power supplies
    • D. CRTs
    • E. system boards
    • Discuss
    • 2. A 2xx POST error code indicates a problem with:

    • Options
    • A. RAM or ROM
    • B. hard drive
    • C. system board
    • D. second adapter card
    • E. CMOS battery
    • Discuss
    • 3. What are the IRQ's for sound card?

    • Options
    • A. IRQ8
    • B. IRQ4
    • C. IRQ5
    • D. IRQ7
    • E. None of the above
    • Discuss
    • 4. Which best describes a fragmented hard drive:

    • Options
    • A. The platters are bad
    • B. Data files are corrupted
    • C. Clusters of data are damaged
    • D. Files are not stored in consecutive clusters
    • E. None of the above
    • Discuss
    • 5. An anti static strap uses a small _____ to make sure you do not become the least path of resistance to the ground?

    • Options
    • A. capacitor
    • B. diode
    • C. transistor
    • D. resistor
    • E. None of the above
    • Discuss
    • 6. Which type of system hoard is the MOST likely candidate for processor upgrading if you want maximum performance and future compatibility?

    • Options
    • A. ML
    • B. PCI
    • C. ISA
    • D. EISA
    • E. None of the above
    • Discuss
    • 7. You can place an ISA device in an EISA slot.

    • Options
    • A. True
    • B. False
    • Discuss
    • 8. ESD damage can be caused by:

    • Options
    • A. Placing an IC in a non-conductive plastic bag
    • B. Placing an IC on a grounded mat
    • C. Repeated sags in current supplied from outlets
    • D. Touching metal on the chassis
    • E. None of the above
    • Discuss
    • 9. What component would most likely cause a "parity error"?

    • Options
    • A. bad hard disk
    • B. bad controller
    • C. bad RAM
    • D. bad software
    • E. None of the above
    • Discuss
    • 10. Which provides the fastest access to large video files?

    • Options
    • A. Optical drives
    • B. IDE hard drives
    • C. SCSI hard drives
    • D. EIDE hard drives
    • E. None of the above
    • Discuss


    Comments

    There are no comments.

Enter a new Comment