Discussion
Home ‣ Mechanical Engineering ‣ Automobile Engineering Comments
- Question
The calorific value of Diesel is about
Options- A. 36.5 MJ/kg
- B. 38.5 MJ/kg
- C. 42.5 MJ/kg
- D. 45.5 MJ/kg
- Correct Answer
- 42.5 MJ/kg
- 1. The braking control type traction control system (TCS) generally operates in the speed range of
Options- A. less than 20 kmph
- B. less than 40 kmph
- C. less than 60 kmph
- D. more than 60 kmph Discuss
- 2. The differential ensures that each wheel is driven at a speed which corresponds to the distance it must travel around a corner, and it consequently prevents against excessive tyre wear.
Options- A. Agree
- B. Disagree Discuss
- 3. The painting of automobiles is done to
Options- A. prevent rust from growing on the body
- B. improve its external appearance
- C. retain the characteristics of steel for long
- D. all of these Discuss
- 4. The calorific value of petrol is about
Options- A. 36.5 - 38.5 MJ/kg
- B. 39.4 - 42.5 MJ/kg
- C. 42.7 - 43.5 MJ/kg
- D. 45.5 - 47 MJ/kg Discuss
- 5. A worm gear is used as the pinion for the rack and pinion type of steering gearbox, because it
Options- A. improves steering comfort when steering wheel is turned to effect small changes in the direction of forward motion
- B. allows the steering wheel to be turned by a greater amount when steering
- C. makes the steering more responsive
- D. reduces the amount of kick-back for large steering angles Discuss
- 6. The piston compression rings are made of
Options- A. cast iron
- B. steel
- C. aluminium
- D. bronze Discuss
- 7. The purpose of turning radius gauges is to measure the
Options- A. contact areas of the tyres
- B. free play of the steering wheel
- C. turning radius of the left and right wheels
- D. difference in the toe angles of the left and right wheels Discuss
- 8. The function of oil-control rings is that it
Options- A. lubricates the cylinder wall by releasing oil from its hole
- B. keeps the cylinder wall lubricated by holding oil in its channel
- C. prevents engine oil from going into the combustion chamber and returns excess lubricating oil off the cylinder wall through the return holes in the piston to the oil pan
- D. maintains a seal and prevents escape of burned gases and oil leakage Discuss
- 9. The function of a first compression ring (top ring) is that it
Options- A. increases the combustion temperature
- B. creates swirl
- C. maintains a seal and prevents the fuel leakage
- D. maintains a seal and prevents escape of burned gases and loss of pressure in the combustion chamber Discuss
- 10. The number of exhaust manifolds in a V-6 engine are
Options- A. one
- B. two
- C. four
- D. eight Discuss
Automobile Engineering problems
Search Results
Correct Answer: less than 40 kmph
Correct Answer: Agree
Correct Answer: all of these
Correct Answer: 42.7 - 43.5 MJ/kg
Correct Answer: improves steering comfort when steering wheel is turned to effect small changes in the direction of forward motion
Correct Answer: cast iron
Correct Answer: turning radius of the left and right wheels
Correct Answer: prevents engine oil from going into the combustion chamber and returns excess lubricating oil off the cylinder wall through the return holes in the piston to the oil pan
Correct Answer: maintains a seal and prevents escape of burned gases and loss of pressure in the combustion chamber
Correct Answer: two
Comments
There are no comments.More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.