Discussion
Home ‣ Mechanical Engineering ‣ Hydraulic Machines Comments
- Question
By fitting an air vessel to the reciprocating pump, there is always a saving of work done and subsequently saving of power.The saving in case of a double acting reciprocating pump is
Options- A. 39.2%
- B. 48.8%
- C. 84.8%
- D. 88.4%
- Correct Answer
- 39.2%
- 1. Power required (in watts) to drive a centrifugal pump is (where Hm = Manometric head in metres, w = Specific weight in N/m3, Q = Discharge of the pump in m3/s, and ?o = Overall efficiency of the pump)
Options- A.
- B.
- C.
- D.
Discuss
- 2. The specific speed of a hydraulic turbine depends upon
Options- A. speed and power developed
- B. discharge and power developed
- C. speed and head of water
- D. speed, power developed and head of water Discuss
- 3. Delivery head of a centrifugal pump is
Options- A. directly proportional to N
- B. inversely proportional to N
- C. directly proportional to N2
- D. inversely proportional to N2 Discuss
- 4. A Pelton wheel with one nozzle is preferred for a specific speed between 35 to 60 r.p.m.
Options- A. True
- B. False Discuss
- 5. A Pelton wheel is
Options- A. tangential flow impulse turbine
- B. inward flow impulse turbine
- C. outward flow impulse turbine
- D. inward flow reaction turbine Discuss
- 6. An impulse turbine is used for
Options- A. low head of water
- B. high head of water
- C. medium head of water
- D. high discharge Discuss
- 7. In a centrifugal pump, the water enters the impeller __________ and leaves the vanes axially.
Options- A. axially
- B. radially Discuss
- 8. The impeller of a centrifugal pump may have
Options- A. volute casing
- B. volute casing with guide blades
- C. vortex casing
- D. any one of these Discuss
- 9. Kinematic similarity is said to exist between the model and the prototype, if both of them
Options- A. have identical velocities
- B. are equal in size and shape
- C. are identical in shape, but differ only in size
- D. have identical forces Discuss
- 10. In order to avoid cavitation in centrifugal pumps
Options- A. the suction pressure should be high
- B. the delivery pressure should be high
- C. the suction pressure should be low
- D. the delivery pressure should be low Discuss
Hydraulic Machines problems
Search Results
Correct Answer:
Correct Answer: speed, power developed and head of water
Correct Answer: directly proportional to N2
Correct Answer: False
Correct Answer: tangential flow impulse turbine
Correct Answer: high head of water
Correct Answer: radially
Correct Answer: any one of these
Correct Answer: have identical velocities
Correct Answer: the suction pressure should be high
Comments
There are no comments.More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.