logo

CuriousTab

CuriousTab

Discussion


Home Mechanical Engineering Strength of Materials Comments

  • Question
  • A localised compressive stress at the area of contact between two members is known as


  • Options
  • A. tensile stress
  • B. bending stress
  • C. crushing stress
  • D. shear stress

  • Correct Answer
  • crushing stress 


  • Strength of Materials problems


    Search Results


    • 1. The shear force of a cantilever beam of length l carrying a uniformly distributed load of w per unit length is __________ at the fixed end.

    • Options
    • A. zero
    • B. wl/4
    • C. wl/2
    • D. wl
    • Discuss
    • 2. Poisson's ratio is the ratio of linear stein to the volumetric strain.

    • Options
    • A. True
    • B. False
    • Discuss
    • 3. The relation between equivalent length (L) and actual length (l) of a column for both ends fixed is

    • Options
    • A. L = l/2
    • B. L = l/2
    • C. L = l
    • D. L = 2l
    • Discuss
    • 4. The maximum shear stress in a thin spherical shell subjected to an internal pressure (p) is zero.

    • Options
    • A. Yes
    • B. No
    • Discuss
    • 5. The equivalent length, of a given column with given end conditions, is the length of an equivalent column of the same material and cross-section with hinged ends, and having the value of crippling load equal to that of the given column.

    • Options
    • A. True
    • B. False
    • Discuss
    • 6. Modular ratio of the two materials is the ratio of

    • Options
    • A. linear stress to linear strain
    • B. shear stress to shear strain
    • C. their modulus of elasticities
    • D. their modulus of rigidities
    • Discuss
    • 7. A section of beam is said to be in pure bending, if it is subjected to

    • Options
    • A. constant bending moment and constant shear force
    • B. constant shear force and zero bending moment
    • C. constant bending moment and zero shear force
    • D. none of the above
    • Discuss
    • 8. The columns whose slenderness ratio is less than 80, are known as

    • Options
    • A. short columns
    • B. long columns
    • C. weak columns
    • D. medium columns
    • Discuss
    • 9. The lower layer of the beam as shown in the below figure, will be

    • Options
    • A. in tension
    • B. in compression
    • C. neither in tension nor in compression
    • Discuss
    • 10. A square beam and a circular beam have the same length, same allowable stress and the same bending moment. The ratio of weights of the square beam to the circular beam is

    • Options
    • A. 1/2
    • B. 1
    • C. 1/1.12
    • D. 1/2
    • Discuss


    Comments

    There are no comments.

Enter a new Comment