Home » Mechanical Engineering » Strength of Materials

The tensile strength of the welded joint for double fillet is (where s = Leg or size of the weld, l = Length of weld, and σt = Allowable tensile stress for weld metal)

0.5 s.l.σt
s.l.σt
2 s.l.σt
2.s.l.σt

Correct Answer: 2 s.l.σt

← Previous Question Next Question→

More Questions from Strength of Materials

A thin cylindrical shell of diameter (d) length (l) and thickness (t) is subjected to an internal pressure (p). The longitudinal stress in the shell is
When a body is subjected to bi-axial stress i.e. direct stresses (σx) and (σy) in two mutually perpendicular planes accompanied by a simple shear stress (τxy), then maximum normal stress is
The horizontal thrust offered by the retaining wall on the retained material is (where w = Specific weight of the retained material, h = height of retaining wall, and (φ) = Angle of repose of the retained earth)
The extension of a circular bar tapering uniformly from diameter d1 at one end to diameter d2 at the other end, and subjected to an axial pull of P is given by
The bending moment at the centre of a simply supported beam with a gradually varying load from zero at both ends to w per metre at the centre is wl/4.
For long columns, thevalue of buckling load is __________ crushing load.
A simply supported beam is one which is supported on more than two supports.
In a thick cylindrical shell subjected to an internal pressure (p), the tangential stress across the thickness of a cylinder is
In order to avoid tearing off the plate at an edge, the distance from the centre of the rivet hole to the nearest edge of the plate (i.e. margin) should be (where d = Diameter of rivet hole in mm)
When a body is subjected to bi-axial stress i.e. direct stresses (σx) and (σy) in two mutually perpendicular planes accompanied by a simple shear stress (τxy), then minimum normal stress is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion